Curing injectors

Production series: SI
Soft injectors

picture gallery
Production sizes: SI 11
SI 11/22
SI 23
SI 23/46
11 units single needles
11 units twin needles
23 units single needles
23 units twin needles

Our SI-type curing injectors are designed to provide automatic injection of curing brine into meat and poultry with and without bone. The adjustable injection pressure of up to 5 bar is generated by a robust, self-priming stainless steel cogwheel pump. The curing needles work without valve control, thus achieving minimal brine heating. If the product is not resting on the surface the brine will return through the cavities of the steady into the priming vessel. The PVC chain module conveyor with profiled surface has an infinitely variable belt feed of 8 to 35 mm. Depending on the type, band widths of 240 and 320 mm are available as well as a maximum product height of 180 mm. The coupling lock on the curing needles facilitates a quick needle exchange.

S p e c i f i c a t i o n s
SI 11 22 23 46
Number of needles 11 single needles 11 double needles 23 single needles 23 double needles
Needle diameter 3(4) mm
Stroke/min 47
Max. product height 180 mm
Width conveyor belt 240 mmn 240 mm 320 mm 320 mm
Belt feed 8 ...35 mm
Brine pressure 1 ... 5 bar
Conveying volume Brine pump 40 Liter/min 40 Liter/min 60 Liter/min 60 Liter/min
Rated voltage 3 x 400V / 50 Hz special voltages on request
Power rating 1,5 kW 1,5 kW 2,2 kW 2,2 kW
Dimensions LxWxH 1300x540x1700 mm 1300x640x1700 mm
Weight 180 kg 205 kg

Production series: SIM
soft injector maxi

picture gallery
Production sizes: SIM 162

The latest product amongst our curing injectors is the SIM 162 type range. These are designed for automatic injection of high viscose brine into meat and poultry without bone. Two needle registers of 81 curing tubes powered by an infinitely variable control providing 16 to 60 strokes per minute, according to the composition of the brine, inject up to 80% of the injection amount per cycle into the product.

S p e c i f i c a t i o n s
SIM 162
Number of curing tubes 162
Number of needle-bridges 2
Needle diameter 3(4) mm
Stroke (pulse) / min 16 ... 60
Max. product height 120 mm
Width product support 440 mm
height product support 1150 mm
Brine pressure 1 ... 6 bar
Rated voltage 230/400V / 50Hz
Power rating 7 kW
Conditions of connection compressed air 7 bar / 4000 l/minNW 13
Dimensions LxWxH 2560x950x2150 mmr
Weight 750 kg
Technical changes reserved !